ZyXEL Communications IES-612-51A - Manual (Page 321)

Chapter 47 IGMP Commands
IES-612-51A User’s Guide
321
where
This command displays the IGMP count limit setting status for the specified DSL port(s). The
following example displays the IGMP count limit settings for ports 1-5.
Figure 183 IGMP Count Show Command Example
47.7 IGMP Snoop Statistics Commands
Use the IGMP Snoop Statistics commands to display current IGMP settings and statistics.
47.7.1 IGMP Snoop Info Statistics Command
Syntax:
ras> statistics igmpsnoop info [clear]
This command displays the current IGMP settings and the number of IGMP-related packets
received. The following figure shows an example.
Figure 184 IGMP Snoop Info Statistics Command Example
47.7.2 IGMP Group Statistics Command
Syntax:
ras> statistics igmpsnoop group [ []]
[portlist] = You can specify a single DSL port <1>, all DSL ports <*> or
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
ras> switch igmpsnoop igmpcount show 1~5
port enable count
---- ------ -----
1 - 5
2 - 5
3 - 5
4 - 5
5 - 5
ras> statistics igmpsnoop info
IGMP Snooping/Proxy is Disable
number of query = 0
number of report = 0
number of leave = 0
number of groups = 0