ZyXEL Communications IES-612-51A - Manual (Page 265)

Chapter 41 Commands Summary
IES-612-51A User’s Guide
265
dsnompsd
[
psd>]
Display or set Maximum nominal
transmit PSD in the DS direction H/H
uscarrier
[ ]
Display or set US carrier mask
from tone 0 to 63 H/H
dscarrier0
[
]
Display or set DS carrier mask
from tone 32 to 255 H/H
dscarrier1
[
]
Display or set DS carrier mask
from tone 256 to 511 H/H
annexl enable Turns on the Annex L feature on
the specified port(s). H/H
annexl disable Turns off the Annex L feature on
the specified port(s). H/H
annexl show Displays the Annex L feature
setting for the specified port(s). M/L
annexi enable Turns on the Annex I feature on
the specified port(s). H/H
annexi disable Turns off the Annex I feature on
the specified port(s). H/H
annexi show Displays the Annex I feature
setting for the specified port(s). M/L
annexm enable Turns on the Annex M feature on
the specified port(s). H/H
annexm disable Turns off the Annex M feature on
the specified port(s). H/H
annexm show Displays the Annex M feature
setting for the specified port(s). M/L
sra enable Turns on Seamless Rate
Adaptation (SRA) ADSL2+ on the
specified port(s). H/H
sra disable Turns off SRA ADSL2+ on the
specified port(s). H/H
sra show Displays the SRA ADSL2+ setting
for the specified port(s). M/L
pmm enable Turns on the Power Management
feature on the specified port(s). H/H
pmm disable Turns off the Power Management
feature on the specified port(s). H/H
pmm show Displays the Power Management
feature setting for the specified
port(s). M/L
pmm set Sets the Power Management
mode H/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P