ZyXEL Communications IES-612-51A User Manual
Page 268
Chapter 41 Commands Summary
IES-612-51A User’s Guide
268
igmpsnoop mvlan
set
|X> [
[name]
Configures a MVLAN entry.
H/H
igmpsnoop mvlan
show
Show multicast vlans,
Include group information
M/L
igmpsnoop mvlan
disable
Turns off a MVLAN entry.
H/H
igmpsnoop mvlan
enable
Turns on a MVLAN entry.
H/H
igmpsnoop mvlan
delete
Removes a MVLAN entry.
H/H
igmpsnoop mvlan
group set
Create a multicast to VLAN
translation entry.
up to 16 entries
Note: IP address in each entry
should be disjointed
H/H
igmpsnoop mvlan
group delete
Delete a multicast to VLAN
translation entry.
H/H
igmpsnoop mvlan
group show
Show a multicast to VLAN
translation entry.
M/L
igmpfilter set
Sets an ADSL port(s) to use an
IGMP filter profile.
H/H
igmpfilter show
[portlist]
Displays which IGMP filter profile
an ADSL port(s) is using.
M/L
igmpfilter profile
set
Configures an IGMP filter profile.
H/H
igmpfilter profile
delete
Removes an IGMP filter profile.
H/H
igmpfilter profile
show
[name]
Displays an IGMP filter profile’s
settings.
M/L
queuemap show
Displays the system’s priority level
to ENET queue mapping.
M/L
queuemap set
Maps a priority level to a ENET
queue.
H/H
garptimer show
Display the system’s garp
settings.
M/L
garptimer join
Set system’s garp join time.
H/H
garptimer leave
Set system’s garp leave time.
H/H
garptimer leaveall
Set system’s garp leaveall time.
H/H
rstp show
Display the system’s rstp settings.
M/L
rstp enable
Turn system’s rstp on.
H/H
Table 88 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P