ZyXEL Communications IES-612-51A - Manual (Page 339)

Chapter 50 Firmware and Configuration File Maintenance Commands
IES-612-51A User’s Guide
339
Enter the management password ( 1234 by default).
Use put to transfer the configuration file from the computer. The configuration file on the
system is named config-0 .
Quit FTP.
Wait for the update to finish. The system restarts automatically.
50.4 Firmware File Upgrade
Use the following procedure to upload firmware to the IES-612-51A.
Use an FTP client to connect to the IES-612-51A.
Enter the management password ( 1234 by default).
Transfer the firmware file to the IES-612-51A. The firmware file on your computer (that you
want to put onto the IES-612-51A is named
firmware.bin . The internal firmware file on the
IES-612-51A is named ras .
Quit FTP.
Wait for the update to finish. The IES-612-51A restarts automatically.
Figure 207 Example: Enter the Management Password
Password: 1234
230 Logged in
Figure 208 Example: Upload the Configuration File config-0
ftp> put xxx.dat config-0
Figure 209 Example: Close FTP Client
ftp> quit
Figure 210 Example: Use an FTP Client to Connect to the IES-612-51A
C:\> ftp
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Figure 211 Example: Enter the Management Password
Password: 1234
230 Logged in
Figure 212 Example: Transfer the Firmware File
ftp> put firmware.bin ras
Figure 213 Example: Close FTP Client
ftp> quit