ZyXEL Communications IES-612-51A User Manual
Page 273
Chapter 41 Commands Summary
IES-612-51A User’s Guide
273
dot1x disable
Turn off dot1x.
H/H
dot1x auth
Set authentication method to
profile or radius.
H/H
dot1x port enable
Turn on dot1x on port.
H/H
dot1x port disable
Turn off dot1x on port.
H/H
dot1x port control
Set port authentication status.
H/H
dot1x port reauth
Turn on or turn off port to do
reauthentication.
H/H
dot1x port period
Set port reauth period.
H/H
dot1x radius show
Display radius server settings.
M/L
dot1x radius ip
Set Radius server IP.
H/H
dot1x radius port
Set Radius server port.
H/H
dot1x radius
secret
Set Radius server secret.
H/H
dot1x profile show
Display accounts for profile mode.
M/L
dot1x profile set
Set account and password for
profile mode.
H/H
dot1x profile
delete
Remove account for profile mode.
H/H
enet show
Displays the Ethernet port
settings.
M/L
enet speed
<10copper|100coppe
r|auto>
Sets the Ethernet port(s)
connection speed.
H/H
enet name
Sets the Ethernet port(s) name.
H/H
enet enable
Turns on the specified Ethernet
port(s).
H/H
enet disable
Turns off the specified Ethernet
port(s).
H/H
enet reset
Reset the ENET interface
H/H
enet length show
Manually set the ENET cable
length, this is used for very rare
cases when connect to some
ENET PHY, in most cases, should
set to auto(system default)
M/~
enet length set
auto|
Display the ENET cable length
setting,
10 m
H/~
smcast show
Display all MAC addresses joined
to ADSL ports.
M/L
Table 88 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P