ZyXEL Communications IES-612-51A - Manual (Page 274)

Chapter 41 Commands Summary
IES-612-51A User’s Guide
274
smcast set Use join/leave to add/ remove
multicast MAC addresses on
specified ADSL ports, a range of
ADSL ports or all ADSL ports.
MAC example: 01005E010203 H/H
smcast delete Removes a static multicast filter
entry by deleting the associated
MAC address. H/H
isolation show Displays the subscriber isolation
feature’s current setting. M/L
isolation enable Turns the subscriber isolation
feature on. H/H
isolation disable Turns the subscriber isolation
feature off. H/H
isolation
daisychain
Set switch mode to daisychain
mode H/H
isolation
standalone
Set switch mode to standalone
mode H/H
ip
show [inband|outband] Displays the Management IP
address settings. M/L
arp show Displays the device’s IP Address
Resolution Protocol(ARP) table. M/L
arp flush Clears the device’s IP Address
Resolution Protocol(ARP) table. H/H
set [/netmask] Sets the Management IP address
and subnet mask. H/H
gateway Sets the IP address of the
device’s default gateway. H/H
route show Displays the routing table. M/L
route set [/netmask]
[metric]
Adds a routing table entry. H/H
route set default
ip>
Sets the device’s default route. H/H
route delete [/netmask] Removes a routing table entry. H/H
route flush Clears the routing table. H/~
ping [count] Pings a remote host. M/L
statistics
monitor Displays hardware monitor status. M/L
adsl show [portlist] Displays ADSL port connection
status. M/L
adsl linedata Displays the line data load per
symbol (tone). M/L
adsl lineinfo Displays the info of the specified
ADSL ports. M/L
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P