Command examples, 1 command examples overview, 2 sys commands – ZyXEL Communications IES-612-51A User Manual
Page 277: 1 log show command, 3 log format, Chapter 42 command examples, Figure 133 log show command example, Table 89 log format, Command examples (277)
IES-612-51A User’s Guide
277
C
H A P T E R
4 2
Command Examples
This chapter gives some examples of commands.
42.1 Command Examples Overview
These are commands that you may use frequently in configuring and maintaining your IES-
612-51A. See
for commands that deal with the IEEE 802.1Q Tagged
VLAN.
42.2 Sys Commands
These are the commonly used commands that belong to the sys (system) group of commands.
42.2.1 Log Show Command
Syntax:
ras> sys log show
This command displays the system error log. An example is shown next.
42.3 Log Format
The common format of the system logs is:
.
Figure 133 Log Show Command Example
ras> sys log show
1 Wed Aug 11 20:37:11 2004 telnetd INFO Session Begin!
2 Wed Aug 11 20:37:05 2004 telnetd INFO Session Begin!
3 Wed Aug 11 20:36:56 2004 telnetd INFO Session Begin!
Table 89 Log Format
LABEL
DESCRIPTION
This is the index number of the log entry.
This is the time and date when the log was created.
This is the process that created the log.