ZyXEL Communications IES-612-51A User Manual
Page 259
Chapter 41 Commands Summary
IES-612-51A User’s Guide
259
snmp getcommunity
Sets the SNMP GetRequest
community.
H/H
snmp setcommunity
Sets the SNMP SetRequest
community.
H/H
snmp trapcommunity
Sets the SNMP Trap community.
H/H
snmp trusthost
Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
H/H
snmp trapdst set
[
Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not
send any SNMP traps.
H/H
snmp trapdst del
Deletes the SNMP trap server
H/H
server show
Displays the device’s service
status and port numbers.
M/L
server enable
mp> Turns on a service. H/H server disable mp> Turns off a service. H/H server port Sets a port for a service. H/H client show Displays the device’s secured M/L client enable Turns on a secure client. H/H client disable Turns off a secure client. H/H client set [ftp] [web] [icmp]] Sets a secured client set: a range H/H syslog show Displays the syslog settings. M/L syslog enable Turns on the syslog logging. H/H syslog disable Turns off the syslog logging. H/H syslog server Sets the IP address of the syslog H/H x stdio show Displays Current Stdio Timeout. L/L stdio set timeout> Sets Current Stdio Timeout. H/H time show Displays the system’s current L/L time set Sets the system’s time. H/H date show Displays the system’s current L/L date set Sets the system’s date. H/H timeserver show Displays the system’s time server. M/L timeserver set Sets the system to not use a time H/H Table 88 Commands (continued) CLASS COMMAND PARAMETERS DESCRIPTION P
client settings.
of IP addresses from which you
can manage the device and the
protocols that can be used.
server.
time.
date.
server.