Igmp commands, 1 multicast overview, 2 igmp snoop commands – ZyXEL Communications IES-612-51A User Manual
Page 313: 1 igmp snoop show command, 2 igmp snoop enable command, Chapter 47 igmp commands, Figure 171 igmp snoop show command example, Figure 172 igmp snoop enable command example, Igmp commands (313)
IES-612-51A User’s Guide
313
C
H A P T E R
4 7
IGMP Commands
This chapter describes the IGMP snooping and filtering commands.
47.1 Multicast Overview
See
for background information on this feature.
47.2 IGMP Snoop Commands
Use the IGMP snoop commands to enable or disable IGMP proxy or IGMP snooping.
47.2.1 IGMP Snoop Show Command
Syntax:
ras> switch igmpsnoop show
This command displays the IGMP mode (proxy, snooping or disabled).
The following is an example.
47.2.2 IGMP Snoop Enable Command
Syntax:
ras> switch igmpsnoop enable
This command turns on IGMP proxy or snooping. Use proxy to have the device use IGMP
proxy. Use IGMP snooping to have the device passively learn multicast groups.
The following example sets the device to use IGMP proxy.
Figure 171 IGMP Snoop Show Command Example
ras> switch igmpsnoop show
IGMP Snooping/Proxy is Disable
Figure 172 IGMP Snoop Enable Command Example
ras> switch igmpsnoop enable proxy