ZyXEL Communications IES-612-51A - Manual (Page 322)

Chapter 47 IGMP Commands
IES-612-51A User’s Guide
322
where
This command displays the information about IGMP groups learned on the system, specified
VLAN, or specified multicast address on the specified VLAN(s).
Figure 185 IGMP Group Statistics Command Example
47.7.3 IGMP Port Info Statistics Command
Syntax:
ras> statistics igmpsnoop port info [portlist]
where
This command displays the number of IGMP-related packets received on the specified port(s).
The following figure shows the number of IGMP packets for port 1.
Figure 186 IGMP Port Info Statistics Command Example
47.7.4 IGMP Port Group Statistics Command
Syntax:
ras> statistics igmpsnoop port group
where
= The VLAN ID [1 – 4094].
= The multicast IP address.
ras> statistics igmpsnoop group
[group info]
group vid port
--------------- ---- ------------------------------------------------ --
[portlist] = You can specify a single DSL port <1>, all DSL ports <*> or
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
ras> statistics igmpsnoop port info 1
port group_cnt query_cnt join_cnt leave_cnt
----- --------- --------- --------- ---------
1 0 0 0 0
= You can specify a single DSL port <1>, all DSL ports <*> or
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.