ZyXEL Communications IES-612-51A User Manual
Page 269
Chapter 41 Commands Summary
IES-612-51A User’s Guide
269
rstp disable
Turn system’s rstp off.
H/H
rstp priority
Set system rstp’s priority.
H/H
rstp hellotime
Set system rstp’s hello time.
H/H
rstp maxage
Set system rstp’s max age.
H/H
rstp fwdelay
Set system rstp’s forward delay
time.
H/H
rstp port show
Display enet port rstp status.
M/L
rstp port enable
Set enet port to enable rstp.
H/H
rstp port disable
Set enet port to disable rstp.
H/H
rstp port priority
Set enet port’s rstp priority.
H/H
rstp port pathcost
Set enet port’s rstp pathcost.
H/H
dhcprelay show
Displays DHCP relay settings.
L/L
dhcprelay enable
Turns on DHCP relay.
H/H
dhcprelay disable
Turns off DHCP relay.
H/H
dhcprelay server
set
server> [ server>] Set DHCP server IP address M/H dhcprelay server delete server>] Delete DHCP server for 1 VLAN M/H dhcprelay server active server> Activate primary or secondary M/H dhcprelay relaymode DHCP relay mode, auto/both M/H dhcprelay option82 enable Turns on the DHCP relay agent M/H dhcprelay option82 disable Turns off the DHCP relay agent M/H dhcprelay option82 set Adds the specified information for M/H dhcprelay opt82sub2 enable Turns on option 82 sub-option 2 M/H dhcprelay opt82sub2 disable Turns off option 82 sub-option 2 M/H dhcprelay opt82sub2 set Adds the specified information for M/H Table 88 Commands (continued) CLASS COMMAND PARAMETERS DESCRIPTION P
where the DHCP request will
forward to
< primary-server >: IP address for
primary server
< secondary-server >: IP address
for secondary server
Maximum 32 entries can be
configured.
Default: (empty list)
DHCP server for 1 VLAN
information (Option 82) feature.
information (Option 82) feature.
the relay agent.
sub-option 2