ZyXEL Communications IES-612-51A User Manual
Page 264
Chapter 41 Commands Summary
IES-612-51A User’s Guide
264
linediag setld
Sets the specified port to line
diagnostic mode.
H/H
linediag getld
Displays the specified port line
diagnostics.
L/L
linediag
getld992_3
Displays the specified port line
diagnostics.
L/L
linediag setselt
Sets the specified port to line
SELT.
H/H
linediag getselt
Displays the specified port line
SELT.
L/L
linediag toneDiag
Displays the specified port line
diagnostics.
L/L
alarmprofile show
[profile]
Displays alarm profiles and their
settings.
L/L
alarmprofile set
lofs> loss> lprs> fast rateup> fast rateup> interleave rateup> rateup> ratedown> fast ratedown> ratedown> interleave ratedown> fail enable> fail fast> ses> uas>] Configures an alarm profile. H/H alarmprofile delete Removes an alarm profile. H/H alarmprofile map Maps specified ADSL ports to an H/H alarmprofile showmap [port number] Displays alarm profile to ADSL L/L alarmprofile showport Displays which alarm profile L/~ usnompsd [ psd>] Display or set Maximum nominal H/H Table 88 Commands (continued) CLASS COMMAND PARAMETERS DESCRIPTION P
alarm profile.
port mapping.
parameters are mapped to an
ADSL port.
transmit PSD in the US direction