beautypg.com

3 editable configuration file, 1 editable configuration file backup, Figure 200 ftp get configuration file example – ZyXEL Communications IES-612-51A User Manual

Page 336: Table 93 filename conventions

background image

Chapter 50 Firmware and Configuration File Maintenance Commands

IES-612-51A User’s Guide

336

This is a sample from a FTP session to transfer the computer file

firmware.bin

to the IES-

612-51A.

This is a sample from a FTP session to transfer the IES-612-51A’s current configuration file
(including the configuration files of all the IES-612-51A) to the computer file

config.txt

.

If your FTP client does not allow you to have a destination filename different than the source,
you will need to rename them as the IES-612-51A only recognizes “config-0” and “ras”. Be
sure you keep unaltered copies of the files for later use.

The following table is a summary. Please note that the internal filename refers to the filename
on the IES-612-51A and the external filename refers to the filename not on the IES-612-51A,
that is, on your computer, local network or FTP site and so the name (but not the extension)
may vary. After uploading new firmware, use the sys version command on the IES-612-51A to
confirm that you have uploaded the correct firmware version.

50.3 Editable Configuration File

The configuration file can be downloaded as a plain-text (ASCII) file. Edits to the
configuration can be made to this file before it is uploaded again to the IES-612-51A.

"

You can change the “.dat” file to a “.txt” file and still upload it back to the IES-
612-51A.

1

Do not upload any invalid files to the IES-612-51A’s configuration file, as it
may permanently damage your IES-612-51A.

50.3.1 Editable Configuration File Backup

Configure your system, and then use FTP to backup the plain-text configuration file onto your
computer. Do the following to backup the configuration file:

Figure 200 FTP Get Configuration File Example

ftp> get config-0 config.txt

Table 93 Filename Conventions

FILE TYPE

INTERNAL
NAME

EXTERNAL
NAME

DESCRIPTION

Configuration File

config-0

*.dat

This is the configuration filename for the
IES-612-51A.

Firmware

ras

*.bin

This is the Operating System firmware on
the IES-612-51A.