Oki B4100 - Manual (Page 82)

T.F.
No.
Item Specifications Default
40055101TH Rev.4 82 /
Table 2.9.1 (3/6) Service Personnel Initial Settings
Echo Protection
Ignore 1st DIS
CED-DIS timer
Tone for echo
OFF
OFF
75 ms
OFF
ON
ON
1.5 sec
ON
(TF-12 table)
Rev.2
10 MDY/DMY
11 Long document SCAN
12 Tone for Echo
13 MH only
14 High-speed modem rate
15 T1 (TX), timeout value
Switches LCD display and report print from month/
day/year to day/month/year or vice versa.
MDY/DMY selectable.
Switches the function of transmitting long-size docu-
ment (more than 380 mm).
ON : Unlimited
OFF : 380 mm.
Switches the function to apply to poor lines with echo
in overseas transmission, etc.
ON: Enables
OFF: Disables
Switches the function of limiting image compression
only to the MH codes.
ON : Coding scheme is MH only. When the
receiving image data is affected by noise on
the telephone line.
OFF : Any of MH, MR and MMR.
Specifies the modem’s starting speed, 33.6K, 28.8K,
14.4k, 9.6k, or 4.8kbps.
Note: The following protocol is added to OKIFAX
5500/5600:
ITU-T standard V.34 for 33.6K or 28.8
kbps operation.
Registers the time duration (in seconds) for which the
fax waits for the remote station’s answer.
This timer starts when the last dialled digit has been
sent in the automatic transmission mode.
* Selects the 3 digit timer
010 to 255 sec selectable.(in one second steps)