Oki B4100 - Manual (Page 390)

40055101TH Rev.4 390 /
1. Block diagram
The circuit diagram shown on page 6/12 consists of Modem (14.4 kbps).
Modem consists the following functions:
•
Modulation/demodulation
Modulation type:
1)
ITU-T Rec. V17 (14400/12000/9600/7200 bps) for G3 picture data.
2) ITU-T Rec. V29 (9600/7200 bps) for G3 picture data.
3) ITU-T Rec. V27 ter (4800/2400 bps) for G3 picture data.
4) ITU-T Rec. V21 channel 2 (300 bps) for binary signals defined in ITU-T Rec. T.30.
• Automatic adaptive equalizer for G3 receive data with 300 bps data excluded.
• Generation of signal tones
• PB tone (multi-frequency tone) generation
• Detection of single tones
• D/A converter for send data (TX)
• A/D converter for receive data (RX)
• Amplitude equalizer for RX
• Selectable attenuation for TX
• Automatic gain control
Figure A3.1.6 shows the related signals of Modem.
A3.1.7 R44 Circuit Diagram (Page 7/12)
X'tal
CPU
IOGA
Modem
14.4 kbps
AD0 to AD7
A1 to A7
MDINT1-N
MDRST-N
MDCSI-N
MDMRD-N
MDMWR-N
S 7
IC12
IC12
R
RP
CN10 CN3
S
R
NCU
29.4912 MHz
R44
IC8
IC2
A8, B8
A6, B6
Figure A3.1.6 Related Signals of Modem