Oki B4100 - Manual (Page 626)

40055101TH Rev.4 626 /
2.2.2 Registering the Facsimile Model No.
1) Seach the directory in which the system is registered. when the systwm is found, register the model
number.
2) Insert a disk corresponding to the the model into drive A, then press any key. The model number is
displayed and the confirmation screen is displayed.
3) When the model number to be registered is correct, enter [Y]. The program corresponding to the model
number is now registered. If not correct, enter [N]. Then repeat from step 1) again.
<< FAX SETTING >>
Remote Management Center System
Press the Esc key to cancel.
FAX Disk set
Push any key
<< FAX SETTING >>
Remote Management Center System
Press the Esc key to cancel.
FAX Disk set
Push any key
OOOOOOOOOO
Are you sure (Y or N)? Y