Oki B4100 - Manual (Page 165)

40055101TH Rev.4 165 /
d) Turn the Frame Assembly-Scanner inside
out and perform the disassembly proce-
dure.
e) Remove the Plate Scanner (L) by remov-
ing the two screws.
f) Remove the Speaker.
g) Remove the Plate Assembly-Scanner (R)
and Plate Earth ADF by removing the
three screws.
h) Remove the Plate Scanner (B) by remov-
ing the two screws and the part of the
fixing hooks.
i) Remove the CIS (contact image sensor).
Plate Scanner (L)
Plate Scanner (R)
Plate Scanner B
Plate Earth ADF
Roller assembly-ADF
Speaker
CIS
Lever PC2
Lever PC1
Roller Assy-ADF
(CP4.1 Fig. 18)
(CP4.1 Fig. 19)