Oki B4100 - Manual (Page 628)

40055101TH Rev.4 628 /
2.2.4 Updating the Password
1) Search the directory in which the system is registered. When the system is found, the old password is
displayed on the screen requesting entry of a new password is displayed.
2) Register a new password of up to 15 alphanumeric characters excluding [\], [“].
Press [Enter] to display the confirmation screen.
3) When the setting is correct, enter [Y]. The password is now updated. If not correct, enter [N]. Then repeat
from step 1) again. If the system operator does not define the PASSWORD, PASSWORD is not checked
when RMCS starting.
<< PASSWORD UPDATE >>
Remote Management Center System
Press the Esc key to cancel.
OLD PASSWORD = [1234567890 ]
NEW PASSWORD = [_ ]
<< PASSWORD UPDATE >>
Remote Management Center System
Press the Esc key to cancel.
OLD PASSWORD = [1234567890 ]
NEW PASSWORD = [ABCDEFGH ]
Are you sure (Y or N)? Y