Oki B4100 - Manual (Page 25)

40055101TH Rev.4 25 /
34 Overheat protection
35 PC interface applications (Option)
Note: This function is the standard
for OKI OFFICE44.
36 Power supply unit and power consump-
tion of the machine
Rev.3
Table 1.5.1 (9/10) Basic Performance Specifications
No. Item Specifications
Rev.3
OKIFAX 4100 OKIOFFICE44
OKIFAX
5200/5500
OKIFAX
5300/5600
Power consumption of the machine
(Typical power)
Transmit
Receive
Local copy
19W
115W
150W
10W
21W
112W
150W
10W
0.5W
Standby
(Power Save OFF)
Standby
(Power Save ON)
60W
160W
210W
16.6W
0.5W
60W
160W
210W
16.6W
** OKIOFFICE44 has standard PC interface,
therfore has no power save mode.
OKIFAX5300/5600 has no power
save mode.
The heater of the fuser unit is controlled within the predetermined
temperature range by the thermistor. If the temperature of the heater
exceeds the range, the LCD displays “PRINTER ALARM 4”.
Furthermore, the built-in thermostat in the fuser unit prevents the
heater from being overheated even in the event of the failures in the
above temperature control circuit.
The following four modes are supported:
1) PC local printer function
2) PC scanner function
3) PC FaxModem function
4) Location Programing function
Note: This function will be supplied as the OKIFAX 4100/5200/
5300/5500/5600 option in case Oki Data can get the
approval in respective countries without modifying the
optional unit.
For, details, see product specification for MFP.
37 Ambient condition
1) Operating condition
2) Storage condition
See Figure 1.5.1
See Figure 1.5.1