Oki B4100 - Manual (Page 124)

40055101TH Rev.4 124 /
Operations:
SELECT FUNCTION (OT)
MEMORY AVAIL.=100%
To bring the LCD up to the desired message,
press SELECT FUNCTION key once and
one-touch key No. 9 in the standby mode.
(In case of no message in memory)
The display shows:
Press key. ←
1:FUNC. PROGRAMMING
YES( ← ) NO( → /1-6)
←
2:DIAL PARAMETER
YES( ← ) NO( → /1-6)
Press OT9
Enter 2 using the ten-key pad.
2
To DIAL PARAMETERS
*1
*1
*1 OKIOFFICE44/OKIFAX 4100 :NO ( →/1−4 )
OKIFAX 5200/5300 :NO ( →/1−5 )
OKIFAX 5500/5600 :NO (
→/1−6
)
*2 Not all of the following
dial parameters are released to the users
(depending on National codes
and if the Service bit is OFF)
2.9.9 Dial Parameters Settings
(1) Procedure
The following shows the case in which the service bit is on.