Oki B4100 - Manual (Page 611)

40055101TH Rev.4 611 /
Classification LCD Status Message Description Recovery method
Jam error (feeding)
*1
Jam error (ejection)
Paper size error
Tray paper out
*2
• Check the paper in the Second
Paper Feeder.
Carry out the recovery printing
by opening and closing the
cover, and turn the error display
off.
• When the problem occurs fre-
quently, go through the Trouble-
shooting.
• Check the paper in the Second
Paper Feeder. Carry out the
recovery printing by opening and
closing the cover, and turn the
error display off.
• Check the paper in the Second
Paper Feeder.
Also check to see if there was a
feeding of multiple sheets.
Carry out the recovery printing
by opening and closing the
cover, and turn the error display
off.
• Load the paper in Second Paper
Feeder.
Notifies of occurrence
of jam while the paper
is being fed from Sec-
ond Paper Feeder.
Notifies of occurrence
of jam while the paper
is being ejected from
the Second Paper
Feeder.
Notifies of incorrect
size paper feeding
from Second Paper
Feeder.
Notifies of no paper
state when both cas-
settes (1st and 2nd)
has no recording pa-
per.
PAPER JAM [FAX]
REPLACE PAPER
PAPER JAM [FAX]
REPLACE PAPER
NO PAPER [FAX]
REPLACE PAPER
*1: Indicates the same message on the display, when 1st or 2nd cassette becomes jam error
(feeding).
*2: However, if 1st cassette has recording paper, LCD indicates the standby mode on the
display and alarm message does not indicate.
PAPER MIS-FEED[FAX]
REPLACE PAPER
Problem occurs
Problem displayed by
the LCD message Troubleshooting
according to the LCD
Status Message List
(see 4.3.1) Carry out detailed
troubleshooting
according to the
Troubleshooting Flow
(see 4.3.1)
4.3 Troubleshooting Method
When a problem occurs, go through the troubleshooting according to the following procedure.
4.3.1 LCD Status Message List
The listing of the statuses and problems displayed in the form of messages on the LCD is provided in Table
4-1.