Oki B4100 - Manual (Page 212)

40055101TH Rev.4 212 /
The display shows:
SELECT FUNCTION (OT)
MEMORY AVAIL.= 100%
DRUM COUNT
CLEAR (
←
) NEXT(
→
)
PRINT COUNT XXXXXX
NEXT(
→
)
SCAN COUNT XXXXXX
NEXT(
→
)
CLEAR
Operations:
To bring the LCD up to the desired message,
press SELECT FUNCTION key once and
one-touch key No.7 in the standby mode.
(In case of no message in the memory)
Press key or key.
← →
Press OT7
→
Key
←
Key
→
Key
→
Key
Note: Clear Operation
After having cleared the drum counter, warning message will be disappeared.
6.3 Printer Counter Display/Clear
Note: The fonts displayed on the LCD operation panel may differ from the fonts written this manual.
1. Purpose
A user can clear the image drum unit and check some of the counters (such as the print counter, scan
counter) by using the
←
key or
→
key.
2. Procedure
The following shows the case when the service bit has been set OFF.