Oki B4100 - Manual (Page 622)

40055101TH Rev.4 622 /
<< INSTALL MENU >>
1: RMCS SETTING
2: FAX SETTING
3: FAX DELETE
4: PASSWORD UPDATE
5: DIP SW UPDATE (For Model 10)
6: RMCS DELETE
7: END
Remote Management Center System
Please select the desired item.
2.2 Installation
When the PC/AT is activated by using the hard disk, insert an RMCS system disk into drive A.
When C>_ is displayed, enter commands as shown below to activate the installation program.
C> A:[Enter]
A> INST[Enter]
Select processing with the numeric keypad.
[1] Register the RMCS basic system.
[2] Register the facsimile model number.
[3] Delete the facsimile model number.
[4] Update the password.
[5] Update the dip switches.
[6] Delete the RMCS basic system.
[7] End of the Menu.
Each processing from [1] to [6] is described later.