Ricoh AP4510 - Manual (Page 398)

UNIX Configuration
22
1
Output Tray
Select the output tray.
outbin=value of output tray
Limitation
❒ Only the installed output trays are available.
Note
❒ The output tray value corresponds to the ID number of the output tray which
is obtained from the printer information (e.g. info command in ftp, info com-
mand in telnet. For more information about telnet, see the Printer Reference.).
❒ You can select an output tray using alphabet letters instead of the ID number
of the output tray. For more printer information, see the Printer Reference.
*1 Finisher 1000 installed
*2 Finisher 3000 installed
*3 Mailbox has nine output bins. The value of “optionaloutbin2”corresponds to the up-
permost output bin. Selecting the bigger value, you can select the upper output bin.
The following sample shows how to print using standard tray (host name:
nphost, file name: file1).
• rsh
% rsh nphost print outbin=upper < file1
• rcp
% rcp file1 nphost:outbin=upper
• ftp
ftp> put file1 outbin=upper
Output Tray Value
Standard Tray upper
Finisher Tray *1
Finisher Upper Tray *2
finishershift
Finisher Lower Tray *2 finisherproof
Mailbox optionaloutbin1
∼10 *3