Ricoh AP4510 User Manual
Page 326
Appendix
86
6
Cannot find rprinter (
The printer having the number displayed on
the print server does not exist. Make sure that
the number of the printer is registered in the
print server.
Change IP address from DHCP Server.
The IP address changes when DHCP LEASE is
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP serv-
er.
child process exec error! (process name)
Failed to start the network service. Turn the
printer off and then on. If this does not work,
contact your service or sales representatives.
Connected DHCP Server(
The IP address was successfully received from
the DHCP server.
connection from
Logged on from the host
Could not attach to FileServer
file server. For some reason, the file server
refuses the connection. Check the file server
configuration.
Could not attach to PServer
(In remote printer mode) Cannot attach to the
print server. For some reason, the print server
refuses the connection. Check the print server
configuration.
Current Interface Speed:xxxMbps
The speed of the network (10 Mbps or 100 Mb-
ps).
Current IP address
The IP address
ceived from the DHCP server.
Current IPX address
The current IPX address.
DHCP lease time expired.
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress used up to now becomes invalid.
DHCP server not found.
The DHCP server cannot be found. Make sure
the DHCP server is running on the network.
dhcpcd start.
A dhcpcd (DHCP client service) has started.
Duplicate IP=
The same IP address is used. An IP address
must be unique. Check the address of the de-
vice indicated in
Established SPX Connection with PServer,
(RPSocket=
(In remote printer mode) A connection with
the print server has been established.
exiting
lpd service has ended and the system is exiting
the process.
Message
Description and Solutions