Ricoh AP4510 - Manual (Page 102)

Paper and Other Media
28
3
•
❍ means that the size is supported and indicated on the tray dial. Be sure to
set the paper size dial to match the actual paper size loaded in the tray.
•
★ means that the size is supported but not indicated on the tray dial. Set the
tray dial to “
p”, and select the paper size using the control panel. (There is
no dial for the Bypass Tray.)
•
✩ means that the size is supported but the paper size should be set with the
control panel as a custom size. The supported size is approximately 3.9 - 11.7
inches in width and 5.8 - 17 inches in length. The supported size may differ
depending on the printer language you use.
• X means that the size is not supported.
Important
❒ If you want to load A4K size paper into the Large Capacity Tray RT36, con-
tact your sales or service representative.
❖ ❖ ❖ ❖ Paper weight and number of sheets to be set
*1 Confirm that the top of the stack is not higher than the limit mark inside the tray.
C5 Env L 6.38 × 9.02 X X X ★
C6 Env L 4.49 × 6.38 X X X ★
DL Env L 4.33 × 8.66 X X X ★
Custom Size
(PCL 6/PS only)
  X X X ✩
Supported paper weight Maximum number of
sheets (plain paper)
*1
Bypass Tray 52 - 163 g/m 2 (16 - 43 lb.
bond)
50 (80 g/m 2 , 20 lb. bond)
For other kind of papers,
see p.29 “Types of Paper
and Other Media”.
Standard Tray (Tray 1/2) 64 - 105 g/m 2 (20 - 28 lb.
bond)
500 (80 g/m 2 , 20 lb. bond) × 2
Paper Bank PS430 (option) 64 - 105 g/m 2 (20 - 28 lb.
bond)
500 (80 g/m 2 , 20 lb. bond) × 2
Large Capacity Tray RT36 (option) 64 - 105 g/m 2 (20 - 28 lb.
bond)
1,500 (80 g/m 2 , 20 lb. bond)
Fe
ed
Dire
cti
o
n
S
iz
e (i
nch)
S
ta
nda
rd
T
ra
y
(t
ra
y1/
tra
y2)
P
ap
er
B
ank
PS4
30
(t
ra
y3/
tra
y4)
La
rg
e Ca
p
a
ci
ty
Tray
R
T
36
Byp
ass Tra
y