Ricoh AP4510 - Manual (Page 139)

Error & Status Messages on the Control Panel
65
5
Reset LCT
Correctly
The Large Capacity Tray is
not set correctly or is not set. Set the Large Capacity Tray
correctly.
Reset Tray
Correctly
The tray selected by the auto
tray select is not set or is not
set correctly. Set the tray correctly.
Reset Tray #
Correctly
The input paper tray is not set
correctly.
#: tray number
Set the input paper tray cor-
rectly.
RPCS Graphic Error There is not enough graphics
memory to print the data. Specify the correct memory
capacity in the [Change Acces-
sories…]
option in the RPCS
printer driver's print settings
tab. For more information, see
"Installing the RPCS Printer
Driver" in the Setup Guide.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
RPCS Memory Overflow A memory overflow occurred
during the print job. After a
part of the data on the page is
printed, the print job is sus-
pended. Specify the correct memory
capacity in the [Change Acces-
sories…]
option in the RPCS
printer driver's print settings
tab. For more information, see
"Installing the RPCS Printer
Driver" in the Setup Guide.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
RPCS Syntax Error An error has occurred in the
syntax. Specify the correct memory
capacity in the [Change Acces-
sories…]
option in the RPCS
printer driver's print settings
tab. For more information, see
"Installing the RPCS Printer
Driver" in the Setup Guide.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
SC XXX- X
Power Off On
/If Error Reoccur
Call Service
The Service Code or SC
number indicates the prob-
lem. Turn the power switch off and
on. If the message appears
again, contact your sales or
service representative.
Messages/Second messages Description Solution