Ricoh AP4510 - Manual (Page 241)

1
1. Windows 95/98/Me
Configuration
Configuring Windows 95/98/Me
Printing without a Print Server
The following procedure describes how to configure Windows 95/98/Me to use
the machine on a network without a Windows 2000 Server, Windows 2000 Pro-
fessional, Windows NT Server, Windows NT Workstation, or NetWare based
print server.
Printing with a Windows 2000 or Windows NT Print Server
See p.10 “Setting Up a Client Computer” for configuring Windows 95/98/Me
with a Windows 2000 or Windows NT print server.
Consult your network administrator about which of the three protocols is appropriate.
2. Configure the chosen protocol
3. Select the appropriate software
4. Install the software and set the printer driver port
1. Specify the protocol to use
TCP/IP
"Using SmartNetMonitor
for Client "
SmartNetMonitor
for Client
"Configuring TCP/IP and IPP for Printing"
"Configuring NetBEUI
for Printing"
If using the printer...
indicates topics explained in this document
IPP NetBEUI