Netware 3.x - advanced settings, Setting up as a print server, P.44 “setting up as a print server – Ricoh AP4510 User Manual
Page 284: P.44 “netware, X - advanced settings, P.44 “net, Ware 3.x - advanced settings, Ee p.44 “netware 3.x - advanced settings, 4netware 3.x - advanced settings
NetWare Configuration
44
4
NetWare 3.x - Advanced Settings
The actual procedures for configuring the machine vary depending on whether
the Network Interface Board is configured as a print server or as a remote print-
er. This section describes how to configure the machine in the NetWare 3.x en-
vironment.
Preparation
The following procedures use the Property Sheet method in configuring the
Network Interface Board. If you configure the Network Interface Board as a
NetWare print server for the first time, we recommend you use the Wizard
method.
⇒ p.41 “Quick Setup Using the NIB Setup Tool Wizard”
Note
❒ This section assumes NetWare is functional and that the necessary environ-
ment for the NetWare Print Service is available.
Setting Up as a Print Server
AAAA
Log on to the file server as a Supervisor or a Supervisor equivalent.
BBBB
Run the NIB Setup Tool.
Reference
⇒ p.40 “Running the NIB Setup Tool”
CCCC
Click [Property Sheet] and click [OK].
The [NIB Setup Tool - Network board list] dialog box of the Network Interface
Board appears.
DDDD
Click [IPX protocol].
Install the NIB Setup Tool
Print Server
Remote Printer
Basic Procedure
Configure the Network Interface Board
Configure the NetWare
Start the print server