Ricoh AP4510 - Manual (Page 132)

Troubleshooting
58
5
Collate Cancelled The collate feature has been
canceled. To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Driver Setting Error (Memo-
ry) The actual amount of memory
installed does not match the
setting of printer driver. The
current print job has been can-
celed. Configure the memory size
correctly from the printer
driver.
Duplex Cancelled Duplex Print has been can-
celed. To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Load paper into the tray indi-
cated.
Exceeded Max. Pages (Col-
late) An error has occurred in the
collation table overflow. To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Exceeded Max. Stored Files The Sample Print job or the
Locked Print job to be sent
from the computer will cause
the maximum number of files
to be exceeded. Delete the stored files.
Exceeded Max. Stored Pages The Sample Print job or the
Locked Print job to be sent
from the computer will cause
the maximum number of stor-
able pages to be exceeded. Reduce the number of pages
to print.
Hardware Problem DIMM An error has occurred in the
printer. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Hardware Problem
Ethernet
An error has occurred in the
Ethernet Board. First, turn off the power
switch and then on. If the mes-
sage appears again, call your
sales or service representative.
Hardware Problem
Finisher
An error has occurred in the
Finisher. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Messages/Second messages Description Solution