Ricoh AP4510 User Manual

Page 327

Message List

Exit pserver

(In print server mode) Exits the print server
because the necessary print server settings
have not been made.

Frametype =

The is configured to be
used on NetWare.

httpd start.

An httpd has started.

inetd start.

An inetd has started.

started with IP:

has been set for and
started.

: Subnet overlap.

Subnet from Netmask and the IP address you
tried to set for overlap the subnet
for another interface.

Set Subnet so that it does not overlap with an-
other interface.

IPP cancel-job: permission denied.

The printer could not authenticate the name of
the user attempting to cancel a job.

ipp disable.

Printing with ipp is disabled.

ipp enable.

Printing with ipp is enabled.

IPP job canceled. jobid=%d.

The spooled job has been canceled due to an
error or by user request.

LeaseTime=(sec), Renew-
Time=(sec).

The resource lease time that was received from
the DHCP server is in seconds.
The renewal time is also in sec-
onds.

(In print server mode) Logged in to the file
server with NDS or BINDERY mode.

multid start.

Data transmission service for multiprotocols
has started.

nbstart start. (NetBEUI)

The service for NetBEUI protocol stack setting
has started.

NBT Registration Broadcast(name>)

Use a local broadcast to map
with the IP address.

nbtd start.

A nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)

NetBEUI Computer Name =name>

The NetBEUI Computer Name is defined as
.

nmsd start. (NetBEUI)

A nmsd (Name Server Daemon) has started.

npriter start. (NetWare)

(In remote printer mode) NetWare service has
started.

nwstart start. (NetWare)

The service for NetWare protocol stack setting
has started.

Message

Description and Solutions