Ricoh AP4510 - Manual (Page 347)

Setting up Options
3
1
Windows 2000, Windows NT 4.0
AAAA
From an application, select the menu command to print.
The print dialog box appears.
BBBB
Open the Printer Properties to set the Sample Print.
CCCC
Click to select the [Job/ Log] tab.
DDDD
Select [Sample Print] in [Print Job].
EEEE
Enter the "User ID" in [User ID]. This can consist of up to eight alphanumeric
(a- z, A- Z, 0- 9) characters.
Note
❒ Select this to identify the user associated with the job.
FFFF
Click [OK] to close the Printer Properties.
GGGG
Start printing from the application's print dialog box.
The Sample Print job is sent to the machine and one set is printed.
HHHH
Check the sample print to confirm that the settings are correct.
If the settings are correct, see "Printing a Sample Print File" in the Printer Ref-
erence.
If not, you can delete the saved job. See "Deleting a Sample Print File" in the
Printer Reference.
Macintosh
AAAA
From an application, select the menu command to print.
The print dialog box appears.
BBBB
Click to select [Job Log] from the pop up menu.
CCCC
Select [Sample Print] in [Job Type], and then select the appropriate setting.
DDDD
Enter the “User ID” in [User ID]. This can consist of up to eight alphanumer-
ic (a-z, A-Z, 0-9) characters.
Note
❒ This is used to identify the user associated with a job.
❒ The "User ID" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) char-
acters.
EEEE
After making all of the settings you want, click [Print].
The Sample Print job is sent to the machine and one set is printed.