Ricoh AP4510 - Manual (Page 143)

Error & Status Messages on the Control Panel
69
5
Error: Optional RAM An error has occurred in the
optional Memory Unit. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Turn off the power switch, Re-
place the Memory Unit, and
then turn on the power
switch. See "Installing Memory
Unit TypeC" in the Setup
Guide.
Turn off the power switch, re-
move the Memory Unit, and
then turn on the power
switch.
Note
❒ If you remove the Memory
Unit, you must set up the
option with the printer
driver. If you are using
Windows 95/98/Me, Win-
dows 2000 and Windows
NT 4.0, see "Installing the
Printer Driver and Software"
in the Setup Guide.
❒ In this case, you might not
be able to print complex
print jobs.
Error: Parallel I/F An error has occurred in the
parallel interface board. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Full: Finisher Proof Tray The proof tray of the optional
Finisher SR730 is full. Remove paper from the tray.
Full: Finisher Shift Tray The shift tray of the optional
Finisher SR730 is full. Remove paper from the tray.
Full: Hole Punch Receptacle The punch waste box in the
Finisher SR730 is full. Remove punch waste.
Full: Mailbox Proof Tray The proof tray of the optional
Mailbox is full. Remove paper from the tray.
Full: Mailbox Tray # The indicated output tray of
the optional Mailbox is full.
#: tray number
Remove paper from the tray.
Full: Standard Tray The standard output tray is
full. Remove paper from the tray.
Full: Waste Toner The waste toner bottle is full
of toner dust. Call your sales or service rep-
resentative.
Messages Description Solution