Ricoh AP4510 - Manual (Page 325)

Message List
85
6
Message List
This is a list of messages written to the machine's system log. The system log can
be viewed using the syslog command.
System Log Information
You can use the following methods to view the system log.
• telnet : Use the syslog command.
⇒ p.71 “System log information”
Message Description and Solutions
Access to NetWare server
denied. Either there is no account for this print
server on the NetWare server or the password
was incorrect. (In print server mode) Cannot log in to the file
server. Make sure that the print server is resis-
tered on the file server. If a password is speci-
fied for the print server, delete it.
add_sess: community al-
ready defined. The same community name already exists.
Use another community name.
add_sess: session not de-
fined. A requested community name is not defined.
add_sess: bad trap addr:, com-
munity: The IP address (0.0.0.0.) is unavailable when
the community access type is TRAP. Specify
the host IP address for the TRAP destination.
add_sess_ipx: bad trap addr: ,
community: The IPX address (00:00:00:00:00:00) is unavail-
able when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
add_sess_ipx: community name> already defined. The same community name already exists.
Use another community name.
add_sess_ipx: session_ipx
not defined. A requested community name is not defined.
ANONYMOUS FTP LOGIN FROM dress>, An anonymous login has been made with a
password from the host dress>.
anpd start. (AppleTalk) An anpd (AppleTalk Network Package Dae-
mon) has started.
Attach FileServer = Attached to the file server as a nearest server.
Attach to print queue (In print server mode) Attached to the print
queue name.
Cannot create service connection (In remote printer mode) Cannot establish a
connection with the file server. The number of
file server users may exceed the maximum
number that the file server can handle.