Selecting the zone, Displaying the printer status, Etalk. see p.23 “selecting the zone – Ricoh AP4510 User Manual
Page 367: P.23 “displaying the printer status
Printer Utility for Mac Functions
23
2
Selecting the Zone
You can change the zone to which the printer belongs under Appletalk.
Important
❒ Confirm that the printer and a Macintosh are connected in an Appletalk en-
vironment.
AAAA
Select [Select Zone...] on the [Utility] menu.
The zone to which the printer belongs and the available zone list appear.
BBBB
Select the zone to which you want to switch the printer, and then click
[Change]
.
A confirmation message appears.
CCCC
Click [Continue].
A confirmation message appears.
DDDD
Press [OK].
EEEE
Select [Chooser] on the Apple menu.
FFFF
Click the [AdobePS] icon.
GGGG
Select the zone selected in step
on the [Appletalk zone:] list.
HHHH
Click to select the printer you want to use on the [Select a PostScript Printer:]
list.
IIII
Close [Chooser].
Displaying the Printer Status
You can display and confirm the current status of the printer.
AAAA
Select [Display Printer Status...] on the [Utility] menu.
The current status of the printer appears.
BBBB
Confirm the current status of the printer.
You can confirm the memory capacity, the VM (Virtual Memory) space, the
hard disk drive status and available space on the hard disk drive. You can
also confirm the zone to which the printer belongs.
CCCC
Click [OK].