Collate, Duplex printing, Collate duplex printing – Ricoh AP4510 User Manual
Page 350
Using PostScript 3
6
1
Collate
Use this function to enable collation. With this feature, the printer can efficiently
print collated sets of multiple-page documents.
Limitation
❒ To use this function, the optional Memory Unit of 128MB in total or Hard
Disk Drive must be installed on the printer.
The following table shows the tabs or menus where you can select this function.
Duplex Printing
Use this function to select duplex printing.
The following table shows the tabs or menus where you can select this function.
You can select the following items. The following items may vary depending on
the operating system you are using.
Windows 95/98/Me
❖
❖
❖
❖ Off
Disables Duplex Printing.
❖
❖
❖
❖ Open to Left
Prints output so that you can open it to the left when bound along the left
edge.
❖
❖
❖
❖ Open to Top
Prints output so that you can open it to the top when bound along the top
edge.
Windows 95/98/Me
[Collate]
on the [Setup] tab.
Windows 2000
[Printer Features]
on [Advanced...] on the [Paper/Quality] tab
in the Printing Preferences Properties.
Windows NT 4.0
[Printer Features]
on [Document Options] on the [Advanced]
tab.
Macintosh
[Collate:]
on [Printer Specific Options] in the print dialog
box.
Windows 95/98/Me
[Duplex]
on the [Setup] tab.
Windows 2000
[Print on Both Sides (Duplex)]
on the [Layout] tab in the
Printing Preferences Properties.
Windows NT 4.0
[Print on Both Sides (Duplex Printing)]
on the [Page Setup] tab
in the Document Defaults dialog box.
Macintosh
[Print on Both Sides]
on [Layout] in the print dialog box.