Ricoh AP4510 - Manual (Page 377)

1
1. UNIX Configuration
This section explains how to set up a network printer and check the print status
using UNIX.
Limitation
❒ To print from a UNIX workstation, use the file that the printer supports.
Before Setup
Setting up can vary depending on the printing commands. Please make sure to
make the settings accordingly.
Using the lp/lpr commands
AAAA
Use the installation shell script to register the device option, as well as the
printer host name and the IP address.
⇒ p.2 “Using the Installation Shell Script”
BBBB
Start printing.
⇒ p.11 “Printing Method”
Using the rsh/rcp/ftp commands
AAAA
Edit the host file to register the printer host name and the IP address.
BBBB
Start printing.
⇒ p.11 “Printing Method”
Reference
See p.6 “After Executing Installation Shell Script” for host file editing.
Note
❒ If you cannot edit the host file, use the install shell script to register the host
name.