Loading paper and other media, Loading paper in the paper tray, 3loading paper and other media – Ricoh AP4510 User Manual

Page 107

Loading Paper and Other Media

Loading Paper and Other Media

Loading Paper in the Paper
Tray

Loading Paper without Changing the
Paper Size

This section describes instructions for
loading paper whose size and feed di-
rection is already set in the standard
paper tray. If you want to change the
paper size or feed direction, see p.34
“Changing Paper Size of the Paper
Tray”.

Reference

For more information on the size
and feed direction of paper that
can be loaded into the tray, see
p.25 “Paper Sizes”.

AAAA

Slide the paper tray out until it
stops.

BBBB

Remove the rear guide by press-
ing the sides of it.

CCCC

Align all four sides of the paper
stack and load it into the tray with
the print side up.

Important

❒ Confirm that the top of the stack

is not higher than the limit mark
inside the tray.

Note

❒ If there is space between the

guides and the stack, move the
guides to fit to the stack.