Ricoh AP4510 - Manual (Page 134)

Troubleshooting
60
5
Hardware Problem
NV-RAM
The printer detected a Memo-
ry Switch error. Remove and reinstall the NV-
RAM.
Hardware Problem
Option RAM
An error has occurred in the
optional Memory Unit. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Turn off the power switch, Re-
place the Memory Unit, and
then turn on the power
switch. See "Installing Memory
Unit TypeC" in the Setup
Guide.
Turn off the power switch, re-
move the Memory Unit, and
then turn on the power
switch.
Note
❒ If you remove the Memory
Unit, you must set up the
option with the printer
driver. If you are using
Windows 95/98/Me, Win-
dows 2000 and Windows
NT 4.0, see "Installing the
Printer Driver and Software"
in the Setup Guide.
❒ In this case, you might not
be able to print complex
print jobs.
Hardware Problem
Parallel I/F
An error has occurred in the
parallel I/F. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Hardware Problem
Shift Tray
An error has occurred in the
shift motor of the shift tray. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Hardware Problem
Staple Unit An error has occurred in the
staple unit. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Hardware Problem
Tray #
An error has occurred in the
indicated tray.
#: tray number
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Messages/Second messages Description Solution