Ricoh AP4510 - Manual (Page 192)

Making Printer Settings with the Control Panel
118
6
Output Tray You can select the default output tray.
Standard Tray, Finisher Shift Tray, Finisher Proof Tray, Mailbox
Proof Tray, Mailbox Tray 1-9
Note
❒ Default: Standard Tray
❒ Only the installed trays appear on the panel display.
Job Separation You can enable Job Separation.
• On
• Off
Note
❒ Default: Off
❒ This menu appears only when the optional Finisher is in-
stalled.
Energy Saver You can set how many minutes the printer waits before switching
to Energy Saver mode. Energy Saver mode reduces electric power
consumption.
On, Off
1 minute, 5 minutes, 15 minutes, 30 minutes, 45 minutes, 60 min-
utes,
Note
❒ Default: On
❒ Default: 1 minute
❒ If there is an error in the printer, the printer will not turn into
Energy Saver mode.
❒ When the printer switches to Energy Saver mode, the Power
indicator turns off, while the On Line indicator stays on.
Memory Usage You can select the volume of memory to be used from "Font Pri-
ority" or "Frame Priority", according to the paper size, resolution
or printer language.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses memory for high speed printing.
Note
❒ Default: Frame Priority
Reference
For more information, see p.136 “Paper Size and Resolution”.
Unit Of Measure You can select "mm" or "inch" for the custom paper size.
Menu Description