Ricoh AP4510 - Manual (Page 281)

Quick Setup Using the NIB Setup Tool Wizard
41
4
Quick Setup Using the NIB Setup Tool
Wizard
With the NIB Setup Tool, you can easily set up a NetWare printing environment.
Reference
For more information about installing the NIB Setup Tool, see p.39 “Installing
the NIB Setup Tool”.
You can select [Wizard] or [Property Sheet] as an installation method.
When you configure the Network Interface Board for the first time, use the Wiz-
ard method.
If you want to use the Property Sheet method, see p.44 “NetWare 3.x - Advanced
Settings” or p.50 “NetWare 4.x, 5/5.1 - Advanced Settings”.
Note
❒ This section assumes that NetWare is functional and that the necessary envi-
ronment for NetWare Print Services is available.
❒ If you configure the Network Interface Board in a NetWare environment us-
ing the NIB Setup Tool, you should install the client software released from
Novell in the following cases.
• Windows 95/98/Me in NDS mode configuration
• Windows NT 4.0 in NDS mode configuration
• Windows NT 4.0 in Bindery mode configuration
• Windows 2000 in NDS mode configuration
• Windows 2000 in Bindery mode configuration
AAAA
Log on to the Netware file server or the NDS tree as an Admin or Admin
equivalent.
BBBB
Run the NIB Setup Tool.
Reference
⇒ p.40 “Running the NIB Setup Tool”
CCCC
Click [Wizard] and click [OK].
The [NIB Setup Tool - Network board list] dialog box of the Network Interface
Board appears.
DDDD
Click [IPX protocol].