Models, Options – HP 8360 User Manual

Page 480

control signal

S-parameter Test

D-submilliature

rearpanel.)

only)

Outputs the pulse modulation waveform that is supplied to the modulator. This can be either

the

generated pulse modulation signal.

female,

panel.)

Pulse Sync Gut

only)

Outputs a 50 wide

pulse synchronized to the leading edge of the

intemally-generatcd

female, rear panel.)

AM/FM Output

002 only)

the

AM or

waveform. This output can drive 50 ohms or

The FM scaling depends on the FM deviation selected.

female, rear

Models

001 Add

Attenuator

With this option, minimum

output power is -110

Maximum leveled output

Option 002

Internal Modulation Generator

Adds a

internal modulation waveform

to the

It provides signals that would otherwise

supplied to the external modulation

inputs.

003 Delete

For security, tamper-resistance, and

sayings in automated system

this

option deletes the

and display.

003 does NOT move the front panel

connectors to the rear

however, so in most cases,

004 should be

with option 003.

option

Rear

output

Moves RF

Input, Pulse

Input, and FM Input

Option 006 Fast Pulse

puke

time to 10

Also effects maximum leveled output

and

harmonic

Not available on the

and

Resolution

700 MATE

programming commands for

system

option 806 Rack

Kit

Used to

mount

while

spaces.

Used to rack mount

without

handles

option 910 Extra

service Manuals

HP 8360
User’s Handbook

Change A 5-21