Synthesized step sweep, Synthesized list mode, Ramp sweep mode – HP 8360 User Manual
Page 409: Internal 10 mhz time base, Synthesized step, Sweep, Internal 10 mhz, Time base
Synthesized Step
Accuracy: Same as time base
Sweep
Minimum Step Size: Same as frequency resolution
Number of Points: 2 to 801
Switching Time: Same as CW
Dwell Time: 100
to 3.2
Synthesized List Mode
Accuracy: Same as time base
Minimum Step Size: Same as frequency resolution
Number of Points: 1 to 801
Switching Time: Same as CW
Dwell Time: 100
to 3.2
Ramp Sweep Mode
(sweep time 100 ms and 5 s):
Sweep Widths n x 10 MHz: 0.1% of sweep width time base
accuracy.
Sweep Widths > n x 10 MHz: Lesser of 1% of sweep width or n x
1 MHz 0.1% of sweep width.
Sweep Time: 10 ms to 100 seconds, 300
maximum rate
Internal 10 MHz
Accuracy: Calibration Aging Rate Temperature Effects Line
Time Base
Voltage Effects
Stability
Aging Rate: 5 x
1 x
With Temperature: 1 x
typical
With Line Voltage: 5 x 10
for line voltage change of
typical
Sweeptime 150
and 5 s for Option 006 instruments.
Specifications