HP 8360 - Manual (Page 159)

AM Menu
Function Group (MOD)
Menu Map
Description This (Option 002 only) accesses the amplitude modulation
softkeys. These engage external and internal amplitude
modulation. They allow you to define the scaling, waveform, rate,
and depth of the internal AM.
AM Toggles on and off the amplitude modulation mode
for an external AM source.
AM On/Off Toggles on and off the amplitude modulation mode
using the internal AM generator.
Internal AM Rate
Sets the rate of the internal amplitude modulation.
AM Depth
Sets the depth of the internal amplitude
modulation.
AM Type Sets the scale to linear at 100% per volt.
Sets the scale to exponential at 10 per volt.
Deep AM
Opens the ALC loop when the detected signal
level power is below the detector’s sensing range.
Menu Displays the waveforms for internal amplitude
modulation.
Programming Codes SCPI: NONE, see the individual listed.
Analyzer: NONE
also see “AM” and “Modulation”.
Operating and Programming Reference HP 8360
User’s Handbook