HP 8360 - Manual (Page 217)

Programming Codes
FM:SENSitivity
AC
FM:STATe
Analyzer: NONE
On/Off Ext
Function Group
Menu Map
Description This (Option 002 only) activates the frequency modulation
mode for an external source. The FM source is connected to the FM
modulation connector. The FM sensitivity function is active. It is
factory preset to 10 MHz/V. Use the numeric entry keys, arrow keys,
or rotary knob to change the sensitivity to 100
or 1 MHz/V.
When external FM is in effect, the RF output is frequency modulated
with a rate and depth set by the external source. The FM coupling
is controlled by the following softkeys: FM Coupling
FM Coupling DC!. The FM coupling defaults to 100 This is AC
coupling for FM rates of 100 or greater. For modulation rates
below 100 choose DC-coupled FM.
An asterisk next to the key label indicates that external FM is active
and
is displayed on the message line.
For synthesizers without Option 002, see FM AC and
DC.
Programming Codes
FM:SOURce
FM:SENSitivity
FM:STATe
Analyzer:
function on, function off
also see “FM” and “Modulation”.
HP 8360
User’s Handbook
Operating and Programming Reference