HP 8360 - Manual (Page 382)

Power
Function Group POWER
Menu Map
Description This activates the power step size function. It can be set
from 0.01 to 20 In this mode, power is stepped by the up/down
arrow keys. An asterisk next to the key label indicates this feature is
active.
Programming Codes
rement] or
POWer:STEP:AUTO
Analyzer: SP or SHPL and UP or DOWN
See Also Size CW, Size Swept
“Programming Typical Measurements,” in Chapter 1.
Size
Function Group FREQUENCY
Menu Map
Description This lets you set the frequency step size for the CW
frequency mode. The step size may be set from 1 Hz to 10
The factory preset size is 100 MHz. CW frequency is
incremented/decremented by pressing the up/down arrow keys.
If an underline cursor appears under a digit in the entry display, then
the value will be modified by the up/down arrow keys or the rotary
knob. The increment/decrement size in this case is the underlined
digit by the power of 10.
If the up/down function is on (asterisk next to key label) and the
cursor is not under one of the active entry area digits, then frequency
value is changed by the up/down size using either the up/down arrow
keys or the rotary knob.
Operating and Programming Reference HP 8360
User’s Handbook