HP 8360 - Manual (Page 234)

Internal Pulse Generator Period
Internal Pulse Mode Gate
Turns on the internal pulse mode during the
positive cycle of the externally generated pulse.
Internal Pulse Mode Trigger
Triggers on the leading edge of the external pulse
input.
Programming Codes SCPI: NONE, see the individual listed.
Analyzer: NONE
See Also a so see “Modulation” and “Pulse”.
Internal Pulse Generator Period
Function Group
Menu Map
Description This (Option 002 only) lets you set a value for the internal
pulse generator’s pulse period. The pulse is adjustable from
300 ns to 400 ms with ‘25 ns resolution. The factory preset default
is 2 ms pulse period. When this feature is active, its current value is
displayed in the active entry area.
Since period and rate are inversely related, if both are given values,
only the last one will be applied which will cause the first one to be
recalculated. Use the one that is convenient for your application. For
example, if you set the pulse period, do not change the pulse rate
(the synthesizer automatically adjusts the rate to match the period.)
Programming Codes SCPI: PULS:INTernal:PERiod [time
Analyzer: NONE
See Also a so see “Pulse” and “Modulation”.
HP 8360
User’s Handbook Operating and Programming Reference