HP 8360 - Manual (Page 253)

Measure
Markers All Off
Function Group
Menu Map
Description
Programming Codes
See Also
MARKER
3
This lets you turn all the markers off. The frequency value
given to the markers remains in memory and will be recalled when
the marker
are pressed again. Markers ,
, and Sweep are not affected by turning the
markers off. The function (or the frequency values) is retained as the
synthesizer settings.
SCPI: MARKer:AOFF
Analyzer: SHMO
Markers , Sweep,(MARKER)
“Marker Operation,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Measure Corr All
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User’s Handbook
POWER
5
This enables the synthesizer to act as a controller to
command an HP power meter to measure flatness correction
values at all frequency points defined in the flatness array.
SCPI: NONE
Analyzer:
NONE
Menu, Mtr Menu
“Creating and Applying the User Flatness Correction Array,” in
Chapter 1.
Operating and Programming Reference