HP 8360 - Manual (Page 215)

FM Menu
Function Group (MOD)
Menu Map
Description This (Option 002 only) accesses the frequency modulation
softkeys. These engage external and internal frequency
modulation. They allow you to define the coupling, waveform, rate,
and deviation of the internal FM.
FM Ext
FM Int
Internal FM Rate
Internal FM Deviation
FM Coupling
FM Coupling DC
Waveform Menu
Toggles on and off the frequency
modulation mode for an external FM
source.
Toggles on and off the frequency
modulation mode using the internal
FM generator.
Sets the rate of the internal frequency
modulation.
Sets the deviation of the internal
frequency modulation.
Sets AC coupling for modulation rates
of 100
or greater. The RF signal
is phase locked.
Sets DC coupling for modulation
rates of less than 100
The phase
locked loop is open.
Displays the waveforms for internal
frequency modulation.
Programming Codes
SCPI: NONE, see the individual listed.
Analyzer: NONE
(MOD), also see “FM” and “Modulation”.
HP 8360
User’s Handbook
Operating and Programming Reference