HP 8360 - Manual (Page 464)

Pulse Pulse modulation specifications apply for output frequencies 400
MHz and above.
On/Off
Rise/Fall Times
Minimum
Width
Internally Leveled
Search Mode
Output Frequencies < 2.0
Output Frequencies 2.0
ALC Off Mode
Output Frequencies < 2.0
Output Frequencies 2.0
Minimum
Repetition Frequency
Internally leveled
Search Mode
ALC Off Mode
Level Accuracy
relative to CW level)
Widths 1
Widths < 1
(Search Mode)
Video Feedthrough
Output Frequencies < 2.0
Power Levels 10
Power Levels > 10
Output Frequencies 2.0
HP
HP
Overshoot, Ringing
Output Frequencies 2.0
Output Frequencies 2.0
Compression
Output Frequencies < 2.0
Output Frequencies 2.0
Standard Option 006
80 80
25 ns 10 ns
50 ns
50 ns
50 ns
15 ns
50 ns
50 ns 50 ns
15 ns
10 Hz 10 Hz
DC DC
DC DC
typical typical
2%
5% 2%
5%
0.1%
1%
typical
1%
1%
typical
80 ns, typical 80 ns, typical
80 ns, typical 60 ns, typical
ns, typical ns, typical
ns, typical ns, typical
In the HP specification applies at ALC levels 0 and above,
and over the 20 to temperature range. Specification degrades 5 below
and 1 per below ALC level 0 in those models.
Option 002 adds 30 ns delay and ns pulse compression for external pulse inputs.
HP 8380
User’s Handbook Change B 5-5